Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tub
Table of contents:
1
2
2.1
2.2
2.3
3
Installation
3.1
Preliminary checks
3.2
3.3
3.4
4
4.1
4.2
4.3
1) Warning
This manual contains important information regarding safety. Before you
start installing the components, it is important that you read all the infor-
mation contained herein. Store this manual safely for future use.
Due to the dangers which may arise during both the installation and use
of the TUB3500, installation must be carried out in full respect of the
laws, provisions and rules currently in force in order to ensure maximum
safety. This chapter provides details of general warnings. Other, more
specific warnings are detailed in Chapters "3.1 Preliminary Checks" and
"5 Testing and Commissioning".
!
According to the most recent European legislation, the pro-
duction of automatic doors or gates is governed by the provi-
sions listed in Directive 98/37/CE (Machine Directive) and, more
specifically, to provisions: EN 12445, EN 12453 and EN 12635,
which enable manufacturers to declare the presumed conformity
of the product.
Please access "www.niceforyou.com" for further information, and guide-
lines for risk analysis and how to draw up the Technical Documentation.
2
page
2
5
5.1
3
5.2
3
3
6
4
6.1
6.2
4
4
7
5
6
6
6
6
6
• This manual has been especially written for use by qualified fitters.
Except for the enclosed specification "Instructions and Warnings for
Users of the TUB3500 gearmotor" which is to be removed by the
installer, none of the information provided in this manual can be con-
sidered as being of interest to end users!
• Any use or operation of TUB3500 which is not explicitly provided for in
these instructions is not permitted. Improper use may cause damage
and personal injury.
• Risk analysis must be carried out before starting installation, to include
the list of essential safety requisites provided for in Enclosure I of the
Machine Directive, indicating the relative solutions employed.
N.B. Risk analysis is one of the documents included in the "Technical
Documentation" for this automation.
• Check whether additional devices are needed to complete the
automation with TUB3500 based on the specific application require-
ments and dangers present. The following risks must be considered:
impact, crushing, shearing, dragging, etc. as well as other general
dangers.
7
7
7
8
8
8
8
9
Publicité
Chapitres
Table des Matières
