Nice Tub Instructions Et Recommandations Pour L'installateur page 10

Manual movement and release: before carrying out this operation please note that release can only occur
when the leaf is stationary.
1. Open the TUB3500 door with the supplied key figure 9.
2. Take the hexagonal key and insert it into the shaft figure 10.
3. Unscrew the screw inside the shaft completely as shown in figure 11.
4. Remove the hexagonal key and close the TUB3500 door.
5. Manually manoeuvre the leaf as shown in figure 12.
9
11
To block: follow the same operations in reverse order
If a fault occurs the automation must be repaired as soon as possible.
Are you satisfied? If you wish to add a new automated system to your house, contact your fitter and we at Nice will
provide the advice ofa specialist, the most developed products on the market, leading-edge operativeness and maxi-
mum compatibility.
Thank you for reading these suggestions and we trust you are fullysatisfied with your new system: please contact your
fitter for all your current or future requirements.
10
10
12