Publicité
Getting Connected and Installing Drivers (Macintosh)
fig.54
12
When you move the mouse cursor
near the sound generator icon, the
cursor will change to a shape.
Click on the icon of each port in
the diagram at right. If sound is
heard from the sound module
connected to the UA-700, the
settings are correct.
13
Exit OMS Setup.
From the File menu, choose [Quit]. If the AppleTalk confirmation dialog box
appears, click [OK] to close the dialog box.
This completes connections for the UA-700 and Macintosh, and installation
of the MIDI driver.
Next, you need to install the ASIO driver.
➝
(
Installing the ASIO driver (p. 47))
I Installing the UA-700 driver (FreeMIDI)
Use the following procedure to install the UA-700 driver. The included
UA-700 FreeMIDI driver is an add-on module for using the UA-700 with
FreeMIDI. In order to use it, FreeMIDI must be installed on the hard disk
from which you started up.
* Disconnect the UA-700 from the Macintosh before beginning the installation.
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the UA-700 FM Driver - E Installer icon (found in the Driver E
folder of the CD-ROM) to start up the installer.
4
Verify the Install Location, and click [Install].
44
Publicité
Chapitres
