Publicité
fig.block3
To cancel Send/Return mode, turn on the power once
again without holding down the Input Monitor switch.
*
External input from a guitar or mic is not possible in this
mode.
Restoring the factory settings
fig.02-6
1. Turn on the power while holding down the Patch
Mode switch and Sequencer Control switch.
2. All of the panel buttons will blink several times.
The factory settings have been restored.
*
Patch data will return to the factory settings.
Limitations at 96 kHz
• Only the Noise Suppressor & Equalizer section and the Compressor & De-Esser section
will function at 96 kHz.
• You cannot record and play back simultaneously.
Block diagram
fig.block
COAXIAL IN
OPTICAL IN
PHANTOM
(XLR ONLY)
SENS.
PAD -20dB
STEREO
MIC 1/L
/MONO
ON/OFF
MIC 2/R
SENS.
AUX IN/L
PHONO EQ
ON/OFF
AUX IN/R
SENS.
GUITAR
SYSTEM
EFFECT
When GUITAR FX is ON
BYPASS
MIC/AUX
A/D
EFFECT
GUITAR
A/D
EFFECT
When MIC FX is ON
BYPASS
MIC
EFFECT
AUX
EFFECT
GUITAR
EFFECT
OUTPUT
INPUT MONITOR
Advanced applications
SYSTEM
EFFECT
COAXIAL OUT
OPTICAL OUT
L
R
OUTPUT
L
D/A
R
PHONES
145
Publicité
Chapitres
