Publicité
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the UA-700 OMS Driver-E Installer icon (found in the Driver E
folder of the CD-ROM) to start up the installer.
4
Verify the Install Location, and click [Install].
fig.03-scdrv2Z.e
5
If a message like the following is
displayed, click [Continue].
The other currently running
applications will exit, and
installation will continue.
6
A dialog box will indicate Installation completed.
Click [Restart] to restart your Macintosh.
OMS settings
To check the OMS settings, you will first need to connect a MIDI sound
module to the UA-700's MIDI OUT connector.
For details on connecting a MIDI sound module, refer to the owner's manual
for your MIDI sound module.
1
Use the USB cable to connect the UA-700 to your computer.
1. With the power switch turned OFF, connect the AC adaptor to the
UA-700.
2. Connect the AC adaptor to an electrical outlet.
3. Use the USB cable to connect the UA-700 to your computer.
fig.advance-on
2
Set the UA-700's ADVANCE (mode select)
switch to the ON position.
3
Set the UA-700's power switch to the ON position.
Getting Connected and Installing Drivers (Macintosh)
Advance mode is
ON
The indication for the
installation location will
differ depending on your
system. Make sure that
the startup disk for the
system you are using is
selected.
Once the connections
have been completed,
turn on power to your
various devices in the
order specified. By
turning on devices in the
wrong order, you risk
causing malfunction and/
or damage to speakers
and other devices.
41
Publicité
Chapitres
