Publicité
2. In Control Panel, double-click System to open the System Properties dialog box.
3. Click the Device Manager tab.
4. Double-click System Devices to display the list of devices.
5. From the list, select Advanced Power Management Support. Then click Properties to open
the Advanced Power Management Support Properties dialog box.
6. Click the Settings tab, and in Troubleshooting, place a check in the check box for Don't Poll
Power Supply Status. Then click [OK].
7. In the System Properties dialog box, click [OK].
8. Restart Windows.
• If you are using the special driver, you can solve this problem in the "EDIROL UA-700 Driver
Settings" dialog box.
For details, refer to the section "Something is wrong with playback; sound is interrupted or notes are
missing" within the Readme_e file located in the folder in which you installed the CD-ROM.
Depending on the virtual memory setting or network-related settings, noise may occur.
Please make the following settings before use.
• In Chooser of the Apple menu, set AppleTalk to "Inactive".
(This setting is not changed as a result of turning off AppleTalk, as requested by OMS when
sequencer software is started up. You must change the setting yourself using the "Chooser".)
• In the "Memory" Control Panel, set Virtual Memory to "Off".
• Depending on the way in which you connect to the Internet, use the UA-700 with the following
settings.
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
If you connect to the Internet via the internal modem port, or are not connected to the Internet
In the "TCP/IP" Control Panel, set "Connect via" to "PPP".
After you have made the settings, restart your Macintosh.
* Do not use software that accesses the network (such as a Web browser) at the same time that you are using
sequencer software or audio editing software.
• Try increasing the Buffer Size in the ASIO Driver control panel.
The name of the settings dialog box will differ depending on your software.
* If you change the buffer size, you must exit the software and then restart it.
* Roland can make no guarantee of, nor provide support regarding the operation of sequencer software and audio
editing software made by another manufacturer. Please contact the manufacturer of the software you are using.
Digitally recorded sound is distorted, is at the wrong pitch,
or contains noise
• If you are using a long optical digital cable, noise may be produced when the cable is
connected, or the sound may be distorted. We recommend that you use optical digital cables
that are no longer than one meter in length.
Troubleshooting
249
Publicité
Chapitres
