Functions With Bluetooth ® Intercom - Caberg JUST SPEAK Manuel D'instructions

3 FUNCTIONS
UK
3.3.2 Functions with Bluetooth
Switch on both CABERG JUST SPEAK systems. When the rider's helmet is
switched on it will seek the passenger's system and automatically establish
an intercom channel.
Note: So that the connection is made automatically when the systems are
switched on, we advise switching on the CABERG JUST SPEAK system
mounted on the passenger helmet first, then the rider's system.
Note: Some Bluetooth
block the automatic connection described above. If this happens, con-
nect manually by pressing the
It is possible to activate and deactivate intercom communications at any time
by pressing the
AK systems.
Note: the CABERG JUST SPEAK may take several seconds to find the
other system, depending on connections already active and the Blue-
tooth devices present. After pressing the button,
®
for the search process to be completed.
Note: If Bluetooth
press the
nection.
Activate/deactivate
intercom mode
When two CABERG JUST SPEAK systems become too far apart, the audio
quality deteriorates significantly and the connection between the two is lost.
44
ENGLISH
devices already connected to the system can
®
button briefly on either of the two CABERG JUST SPE-
connection does not take place automatically, simply
®
button briefly on either helmet to activate search and con-
Press button
take a few seconds to detect the other CA-
BERG JUST SPEAK.
intercom
®
button briefly.
briefly. The system may
leave enough time