Functions; Basic Functions - Caberg JUST SPEAK Manuel D'instructions

3 FUNCTIONS

UK

3.1 Basic functions

All CABERG JUST SPEAK functions are activated by using the three but-
tons, - + .
Every command is confirmed by a special tone. This can change according to the
function requested. The type of command given to the system depends on how
long the button is pressed.
Switch on Press and hold the
LED flashes and "on" tone is heard in the headset (high tone).
Switch off Press and hold the
shines steadily and "off" tone is heard in the headset (low tone).
Increase volume Press + button briefly to increase volume. A high tone
sounds when maximum volume is reached.
Decrease volume Press - button briefly to decrease volume. A low tone
sounds when minimum volume is reached.
Each of the three system statuses is indicated by a different LED flash pattern:
blue/red/blue LED: battery needs charging
Rapid alternating red/blue flashing: the system is in pairing mode and
can be detected by another CABERG JUST SPEAK kit or other bluetooth
compatible unit.
Slow blue flashing: the system is operative.
38
ENGLISH
Warning: listening to the unit should not distract the
motorcycle rider from control of the vehicle. This has
absolute priority. In line with Highway Code guidelines,
the motorcycle should be stationary when making all
adjustments to electronic equipment and the CABERG
JUST SPEAK system.
button for about 4 seconds, until the
button for about 4 seconds until the LED
®