Pairing With A Bluetooth ® Cellphone - Caberg JUST SPEAK Manuel D'instructions

3 FUNCTIONS
UK
3.2.1 Pairing with a Bluetooth
(or other Bluetooth
Two Bluetooth
®
each other. The cellphone detects the CABERG JUST SPEAK system as a
Bluetooth earpiece. Consult your cellphone handbook to see how to pair
®
the devices (connecting Bluetooth
JUST SPEAK.
1 Make sure the CABERG JUST SPEAK is turned off.
2 Press the middle
3 The system will come on after about 4 seconds. Without releasing the but-
ton, keep the button pressed for another 4 seconds until the LED flashes
rapidly (alternating red/blue flashing) and a tone can be heard through the
loudspeakers. This indicates the system is in pairing mode.
4 While the CABERG JUST SPEAK system is in pairing mode, search for
Bluetooth devices with the cellphone, MP3 player or GPS unit according
®
to the instructions in the handbook.
5 IThe name "Caberg BT3.00 12a" (the numerical part could be different), fol-
lowed by the manufacturer's identification data, will appear on the phone
display in the list of available devices.
6 Select the CABERG JUST SPEAK device.
7 When the password is requested, insert the code 0000 (four zeroes). The
CABERG JUST SPEAK will confirm pairing with a headset tone, and the
LED will switch from rapid to slow flashing.
8 Switch the CABERG JUST SPEAK system off and on again to memorise
the pairing information.
Note: if it is necessary to repeat the operation, switch the system off and
start again from step 1). The pairing operation can be repeated without
risk of damage to the system.
40
ENGLISH
device)
®
devices must be paired before they can communicate with
button.
cellphone
®
devices) before pairing with CABERG
®