To Select Connected Devices - Philips 30PF9946D/37B Mode D'emploi

2355.4 en 02-11-2004
HDMI (High Definition Multimedia Interface) connector
AV3
L
AUDIO
HDMI
R
Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the
connector of your TV.
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong
with the set.

To select connected devices

7
AV+
AV+
ACTIVE
SAP CONTROL
AUTO
M
14:19 Pagina 9
HDMI is the leading new standard for Digital High Definition video
and audio interconnection. Eg. with a Digital Set top box, with
HDMI-equipped devices like a DVD-R, AV receiver...
Note: The HDMI connector does
audio.
The
HDMI
- the following TV and monitor display modes:
EDTV 640/720 x 480p
HDTV 1920 x1080i
VGA
SVGA 800 x 600
XGA 1024 x 768
- uncompressed HD content
- encrypted or non encrypted signals.
8 9
According to where you connected the accessory devices, press
- • followed by digit '
0 AV+
• followed by digit '
AV+
SLEEP
• followed by digit '
AV+
TIMER PIP
AUTO to the rear or to the side (according to the type of TV you've
a
purchased), see p. 6
• followed by digit '
AV+
connected to
• followed by digit '
AV+
connected to
• followed by digit '
AV+
, see p. 8
AV3
• + followed bij digit '
AV
Note: When in HD or PC mode, first press the
mode or to select
support DVI devices with analogue
NOT
connector allows
720 x 576p
640 x 480 60 Hz
60 Hz
60 Hz
' to select
1 AV1
' to select
2 AV2
' to select
3 REAR
' to select
4 HD-A
, see p. 8
AV3
' again to select
4
, see p. 9
AV3
' to select
5 PC-A
' and followed by
1
, or
AV1 AV2 REAR
HDMI
for a device connected
for a HD-A device
for a HD-D device
HD-D
for a PC connected to
to select .
P+ CVI
button to return to TV
TV
again.
9