Video Recorder; Other Equipment; To Select Connected Equipment - Philips 29PT8521/12 Mode D'emploi

Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
(In order to connect your Canal + decoder, please use EXTERNAL 1 at the back of the TV.)
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.

Video recorder

Other equipment

Amplifier
(only available on certain versions)
.
` ù
10
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, Canal+,
etc.) to EXT1, and the equipment which produces the S-
VHS signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1
or EXT2.
To connect to a hi-fi system, use an audio connection cable
and connect the "L" and "R" outputs on the TV set to the
"AUDIO IN" "L" and "R" input on your hi-fi amplifier.

To select connected equipment

n
Press the key to select
from the EXT2 socket) and
Most equipment (decoder, video recorder) carries out the switching itself.
, ,
EXT1 EXT2 S-VHS2
for connections on the front panel.
EXT3
0
.
(S-VHS signals