Connecting; Connecting Peripheral Equipment; Video Recorder; Other Equipment - Philips 14PF6826/58 Mode D'emploi

Connecting

Connecting peripheral equipment

Video recorder

:
EXT1 AV Out

Other equipment

:
EXT1 AV Out
Side connections
*
Amplifier
:
EXT1 AV Out
AV
in
4
The TV works with a DC supply (the voltage is indicated on
the label). Only use the AC-DC adaptor supplied with the TV.
• Connect the DC plug of the adaptor to the TV DC
socket. Leave a space round the adaptor for ventilation.
• Insert the adaptor power lead and insert the mains plug
into the wall socket.
• Use the aerial connection lead supplied and connect the
:
aerial socket.
• Arrange the leads by passing them through the television
stand.
Video recorder (or DVD recorder)
Carry out the connections shown opposite, using a good
quality euroconnector cable.
DC in
Video recorder with decoder
Connect the decoder to the second euroconnector
socket of the video recorder.You will then be able to
record scrambled transmissions.
Satellite receiver, decoder, DVD, games, etc.
Make the connections as shown opposite.
DC in
Make the connections as shown opposite.With the
select
Headphones
S-Video
When headphones are connected, the sound on the TV set
Video in
L
will be cut.The
Audio in
R
level.
The headphone impedance must be between 32 and 600 Ohms.
To connect a Hi-fi unit, use an audio/video connecting cable
and connect :
DC in
- The "L" and"R" outputs of the TV set to an "AUDIO IN"
"L" and "R" of the Hi-fi unit.
- The "VIDEO" output of the TV set to a "VIDEO IN"
input of the amplifier.
socket situated at the bottom of the TV to your
.
S AV
@ #
P keys are used to adjust the volume
~
key,