Picture Settings; Sound Adjustments; Feature Settings - Philips 29PT8521/12 Mode D'emploi

Picture settings

H ¬
& Press
then
displayed :
Main •
Picture
Sound •
Features •
Install •
îÏ
é Use the
Ȭ
the keys to adjust.
Note : during the picture adjustment, only the
selected line remains displayed. Press
display the menu again.
Description of the adjustments :
this changes picture brilliance.
• Brightness :

Sound adjustments

H
& Press
, select Sound (
The menu is displayed :
Sound
Main •
Picture •
Sound
Features •
Install •
îÏ
é Use the
Ȭ
the keys to adjust.
Description of the settings :
• this alters the high frequency sounds.
Treble :
• this alters the low frequency sounds.
Bass :

Feature settings

H
& Press
, select
Features
You can adjust :
é
,
Timer Child Lock
see next page
"
Dynamic NR: Min
or attenuates picture noise (snow)
Max Off :
in difficult reception conditions.
'
(only available on very large screen
Rotation
sets) : large screen sets are sensitive to
terrestrial magnetic field variations.
This setting is used to compensate for this by
adjusting the picture rotation.
6
.The menu is
Picture
Brightness •
Colour •
Contrast •
Sharpness •
Colour Temp. •
Digital Options •
Store •
keys to select a setting and
îÏ
Ï
) and press
Treble •
Bass •
Balance •
Delta Volume •
AVL •
HP Volume •
Store •
keys to select a setting and
Ï
( ) and press
and . :
Parental Cont
, (optimum position),
Med
• Colour :
• Contrast :
between the light and dark tones.
• Sharpness :
• Colour Temp.:
rendering:
or
Warm
•
Digital Options :
-
100 Hz :
-
Digital Scan (according to the version)
line flicker which is visible on some pictures.
-
Double lines :
which removes visible picture lines.
Advised for NTSC (60Hz) pictures.
to
" Once the adjustments have been made, select
Store
Press
¬ •
Balance :
.
and right speakers.
•
Delta Volume :
any volume discrepancies between the
different programs or EXT sockets.
This setting is available for programs 0 to 40
and the EXT sockets.
•
AVL
used to limit increases in sound, especially on
program change or advertising slots.
•
HP Volume :
headphones volume independently from the
loud-speakers on the TV set.
" Once the adjustments have been made, select
Store and press
' To quit the menus, press
¬ (
Dynamic Contrast (according to the version) :
.
,
Min Med
Enhances the contrast of details in lighter,
average and darker areas.
§
Decoder :
external decoder then select the connector
where the decoder is connected :
.
EXT2
If the decoder is connected to the video recorder,
select the video recorder's connector (
è To quit the menus, press
this changes the intensity of the colour.
this changes the difference
this changes the picture definition.
this changes the colour
(bluer),
Cold Normal
(redder).
100 Hz processing.
doubling of vertical resolution
¬
and press to store them.
d
to exit.
this balances the sound on the left
this is used to compensate
(Automatic Volume Leveller) : this is
allows you to adjust the
¬
to store these changes.
d
(optimum position),
select the programme(s) that use the
d
(balanced)
reduces
:
.
or .
Max Off
or
EXT1
).
EXT2
.