Table des Matières
Publicité
Technical Data
Working pressure range
Honda GX120 Gasoline Engine
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose & gun
Dimensions:
Length
Width
Height
Height (handle retracted)
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Wetted parts, pump & hose
Wetted parts, gun
Storage temperature range ◆❖✦
Operating temperature range ✔
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can afftect sprayer performance.
✦ See engine manual for storage instructions.
3A2819A
0-3000 psi (0-21 MPa, 0-207 bar)
1/4 in. x 50 ft (6.4 mm x 15 m)
7/8" - 14 UNF external thread
1/4 NPSM external thread
#12 mesh (1675 micron)
zinc-plated carbon steel, nylon, stainless steel, PTFE, acetal, nickel and
chrome plating, fluoroelastomer, leather, UHMWPE, aluminum, carbide
aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE,
-30° to 160°F (-35° to 71°C)
40° to 115°F (4° to 46°C)
120 cc
4.0
0.75 gpm (2.82 lpm)
0.027 in. (0.69 mm)
89 lb (40.5 kg)
92 lb (41.8 kg)
31 in. (79 cm)
22.5 in. (58 cm)
41 in. (104 cm)
31.5 in (80 cm)
zinc
Technical Data
27
Publicité
Table des Matières
