Safety; Safety Instructions - Bartscher MFG 7340 Mode D'emploi

2.Safety

This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes and thus
operating this device safely and in a fault-free manner is very essential to protect
yourselves from the hazards.
Before using the device read this operation manual and keep it for future use. When the
device is transferred to the third party, this operation manual should be transferred as well.
All persons using the device must follow the recommendations and instructions in this
manual.

2.1 Safety instructions

•
To prevent hazards and to ensure optimum efficiency, no modifications or alterations
to the device that are not explicitly approved by the manufacturer may be
undertaken.
•
This device may only be operated in technically proper and safe condition.
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that
no one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the device
or personal injury, and further, the warranty expires. Use only original spare parts!
•
Before cleaning or maintenance and in case of longer operation brake deactivate the
device, disconnect it from the electric power supply, and close the gas valve.
- 32 -