Arexx BS-1000LAN Mode D'emploi page 80

How do I receive my PC BS-500 data at my laptop?
To do so please apply the synchronisation functionality of the logger software.
Open the sync file config tool. At the PC name enter a network's name (in this
case the laptop's name) as the target to which the PC-logger is going to send
data. At the laptop we follow the same procedure, but this time you will have to
specify the data source (in this case the PC).
For further information see the Synchronization_Configuration_Tool.pdf
How to transfer the old temp logger data to another PC?
Use the backup functionality (file-> export backup), which will generate a zip-file
with all logger data.
Then install the logger software at your new PC and apply the import backup
function to import the zip file created at the first PC.
I did modify several setup parameters in the software (e.g. names
and colours), which suddenly have disappeared.
In a standard situation, these data has been stored in the document directory
(TempLogSetting.xml). Inspect the directory for the setup data (Logger Menu
> save File setup-data) and check for the file "TempLogSetting.xml". Save the
setup parameters in a directory for which you always have sufficient rights.
Can we use sensor data to control external devices?
The SAM-04 LAN network I/O relais box enables you to switch off and on devi-
ces. The SAM directly can communicate with the BS-XXXX. This option allows
you to directly use the logger's data to control external devices. The complete
system, BS-XXXX and the SAM, can also be surveyed and controlled from a
remote website.
Is there an APP for the Multilogger?
Yes there is an Android app in the Google playstore
80
E
N
G
L
I
S
H