Arexx BS-1000LAN Mode D'emploi page 59

Messenger
E
N
G
L
I
The messenger is configured via a "Rule file" that is set up via a so-called,
S
`Rule Editor` and which contains one or more messenger rules. These indi-
cations define actions that are triggered as sson as one or more conditions
H
are met. The currently valid `Rule file` will be marked as "current version".
Further details are given in the description Rule Editor. When you submit an
empty file field, the current rule file is erased, and no rules are applied.
With the messenger software, you can send messages via e-mail and/or
http. This message may contain the most recent data from a sensor. It can
be set as an alarm and may be chosen in a way that only a meassege will
be send if it meets certain conditions, for example the temperature is below
0 degrees Celsius. (In the BS-1000 and TL-09 also an buzzer will go on).
O
Fig.11. Messenger
Buzzer
The buzzer will be activated when
the condition value „true" is.
The buzzer will go out automatically
after 5 seconds. You can switch off
the buzzer also directly with the red
button on the backside.
Buzzer off switch
59