Ego Power+ ST1530 Guide D'utilisation page 27

6. Remove the plain washer from
the motor shaft and save it for
reassembly (Fig. 24).
7. Hold the spool base and pull it
straight out from the motor shaft
(Fig. 25).
8. Remove the flange cover and then
remove the flange from the motor
shaft (Fig. 26). Check and replace
them if they are worn.
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER — ST1530/ST1530-FC
24
Plain Washer
25
Motor shaft
26
Motor Shaft
Spool Base
Flange
Flange Cover
27