Ego Power+ ST1530 Guide D'utilisation page 24

3. Remove the cutting line from the
spool retainer.
4. With one hand holding the spool
base, use the other hand to grasp
the spool retainer and align the tabs
on the spool retainer with the holes
in the spool base (Fig. 17); use your
palm to press and rotate the spool
retainer left and right until the tabs
lock with the spool base (Fig. 18).
5. Following the instructions in "LINE
REPLACEMENT" to reload the
cutting line.
24
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER — ST1530/ST1530-FC
17
18
Alignment