Use; General Instructions On Use; Connection Of Accessories - Dräger FPS-COM 7000 Notice D'utilisation

3

Use

3.1

General instructions on use

3.1.1 Behaviour of the communication unit
The communication unit is preconfigured with a specific number of
groups prior to delivery according to customer specifications.
Additional groups can be set using the configuration software.
When the communication unit is switched on, it starts in the factory
setting with "Group one".
Dräger recommends establishing rules for use and switching between
groups and ensuring training is carried out. If several fire stations use
these communication units in the same operating area, the groups
should be split among the fire stations and common groups should be
defined.
If group members leave the reception range for a group, the
communication units automatically create a new group with the same
group ID. This ensures communication is maintained between the
members leaving the group. If groups with the same group ID meet
each other, they are automatically merged to form one group (see
page 4, Fig. B and C).
3.1.2 Display of operating status conditions
The communication unit provides information on specific status
conditions using the LED and signal tones. The meaning of the LEDs
is shown on the first fold-out page.
Dräger FPS-COM 7000
3.1.3

Connection of accessories

The communication unit may only be used in potentially explosive
atmospheres with accessories that are intrinsically safe. If accessories
that have not been approved by Dräger are used, compliance must be
ensured with the parameters specified in the supplement 9031244.
NOTICE
i i
The voice quality of the communication unit can be influenced
by the connected radio and its settings.
3.1.4 Switching on the communication unit
Press the ON/OFF button for approx. 1 second.

A visual and an acoustic signal indicate that the communication
unit is operational.
3.1.5 Switching off the communication unit
Press the ON/OFF button for at least 3 seconds.

A visual and an acoustic signal indicate that the communication
unit is being switched off.
25