Settings Menu E; Navigating The Menus - Arcam Solo movie Manuel

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
settings menu

Navigating the menus

The Solo menus can be navigated by using
the cursor (arrow) keys on the remote
control.
The Settings menus allow you to configure
all aspects of your Solo. The next few
pages will go through the menu items and
explain their function. The Settings menus
may look daunting if you are new to
setting up home cinema, but the majority
of them need only be configured once
when you first install the system.
The best way to view the Settings
menus is on your display device (TV or
projector), using the on-screen display
(OSD) capability of the Solo. This is highly
recommended when setting up the Solo
movie. To view the OSD for the system
setup, connect the video output to your
display device. However, setting up the
Solo music may be performed using the
Solo front panel display only, should an
external display device is not available. The
diagrams in this section will aid you with
navigating through the settings menu and
Press the
screen at any time.
all the available options
Entering the settings menu
The SETTINGS icon is shown on the screen
when the Solo is first switched
on.
If the main menu is not
currently displayed, press
on the remote control to display it.
Note that during the playback of
music, video or JPEG files, further button
presses may be required to exit the folder
structure.
With the SETTINGS icon highlighted,
press O to enter the Settings menu
Display
With the SETTINGS icon highlighted on
your display, press O to show the 'Display'
'
,
1. Use the
and
keys to navigate
options.
up and down the main headings in
Press
the left-hand panel.
second column.
2. With the main section you require
TV Aspect Ratio – Set the aspect ratio
E
highlighted, use the
key to enter
(shape) of your display. Press
the middle column.
the options in the third column.
'
,
3. Use the
and
keys to navigate
<
up and down the options in the
middle column. Some options may
be greyed out because they are not
<
currently selectable.
4. Pressing > selects a setting: use the
'
,
and
keys to change the
setting.
<
5. Press O to confirm the setting. Go
back to step 4 to adjust any other
settings in the current section.
6. Press < or RTN to return to the
previous screen if you want to select
another section to adjust.
button to return to the home
<
Resolution – Set the video resolution of
the HDMI output (applies to the internal
disc player only):
<
<
<
<
<
<
lines (PAL) progressive video
480i/576i: 480 lines (NTSC) or 576
<
lines (PAL) Standard Definition
interlaced video.
E
to move to the options in the
TV System – Set the video signal format. If
the colour or picture quality of analogue
video appears incorrect, change this
E
to move to
setting. It should not need to be adjusted
in normal use. You can select NTSC (the
16:9 Normal: Use with widescreen
USA and Canada video standard), PAL
TVs. 4:3 material is zoomed to fit the
(the Europe, Australia and China video
wide screen.
standard) or AUTO which will output the
16:9 Full: Use with widescreen TVs.
frame rate required by the TV.
4:3 material is displayed in its original
HDMI Color Space – 'Colour Space' refers
aspect ratio, with vertical black bars at
to the number of individual colors that
the sides.
can be displayed on the screen. If you
4:3 Pan&Scan: Use with 4:3 non-
know the color space capability for
widescreen TVs. 16:9 widescreen
the connected TV, you can match it
content is displayed with the left- and
by selecting one of these options. We
right-hand sides of the image cropped
recommend you select 'Auto' .
to fit the screen (no black bars). The
HDMI Deep Color – sets the level of Deep
aspect ratio is maintained (the image
Colour processing applied to the HDMI
is not stretched).
video output. You can select 'Auto' or 'Off' .
4:3 Letterbox: Use with 4:3 non-
If this option is set to Auto and your TV
widescreen TVs. 16:9 widescreen
supports Deep Color, the screen displays
content is displayed with black bars at
colours at 30-, 36- or 48-bit accuracy
the top and bottom.
(compared to the 24-bit accuracy of
standard colour).
Check the documentation that came with
your TV to see if your TV supports Deep
Auto: Sets the TV's preferred
Colour. All system HDMI interconnect
resolution.
cables must be Deep Colour compatible in
4K2K: Ultra HD video.
order to use Deep Colour signals.
1080p: Full HD progressive video.
HDMI 1080p 24Hz – You can select 'Auto' or
1080i: Interlaced HD video.
'Off' . Movies are recorded on film at a rate
720p: Progressive HD video.
of 24 pictures (frames) per second. Many
480p/576p: 480 lines (NTSC) or 576
of the movies on Blu-ray Discs are placed
on the discs at this frame rate. If your TV
E-28
supports 24 frames per second, but you
would prefer to view the video at a higher
frame rate, you should turn off HDMI
1080p 24Hz.
NOTE
The connected equipment (AV
<
receiver, TV/projector) must be
1080/24p compatible
The output resolution must be set to
<
1080p or HDMI Auto
HDMI 3D – To turn the 3D feature (if
available) on or off. You can select 'Auto'
or 'Off'

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Solo music

Table des Matières