Arcam Solo movie Manuel page 22

AMP device mode
The AMP device mode button configures
the remote to control the Solo. Pressing
this button does not affect the currently
selected input on the Solo.
The functionality of the Solo is context
sensitive for the internal sources and is
described in the following table.
Toggles Solo power between
2
standby and powered on.
Open/close disc tray.
1
Searches for and plays the
track corresponding to the
0...9
key pressed when playing
a CD.
Lipsync. Delays may be
introduced into the video
signal by video processing
which causes a mismatch
between the audio and
video timing. You will notice
this by speech sound being
out of synchronization with
SYNC
the lip movements in the
video. To compensate for
this, you can adjust the lip
sync delay. Press the sync
button and use the < and
> navigation buttons. Press
again to exit the lipsync trim
menu.
Info cycles through the
information displayed on the
INFO
lower left portion of the front
panel display
Rewind CD, DVD or BD.
7
Fast Forward CD, DVD or BD.
8
Skip back to the beginning
of the current/previous track
9
on CD, DVD or BD.
Skip forward to the
beginning of the next track
:
on CD, DVD or BD.
Stop playback on CD, DVD
<
or BD.
Play content on CD, DVD
4
or BD.
Pause playback on CD, DVD
;
or BD.
MENU Disc menu.
Activates BD pop up menu, if
POP UP
available.
Return from menu on BD/
RTN
YELLOW Yellow button for BD
DVD menus.
Selects between the
AUDIO available audio tracks on a
BD/DVD
Navigate the files and menus
on the screen. OK selects the
highlighted file or enters the
highlighted menus on the
screen - equivalent to 'Enter'
or 'Select' on some remote
control.
AMP+' Power on from standby
AMP+, Standby from Power on
Changes the picture
AMP+>
resolution
Returns navigation to the top
level of the menu ('Home').
Toggles the mute function of
the Solo
Cycles through the available
MODE
surround and downmix
modes
Bluetooth commands
Cycles through the front
The Bluetooth audio input is selected by
DISP panel display's brightness
pressing BT in AMP device mode on the
options
remote control. When connected to an
audio streaming device, the keys below
Increase/decrease amplifier
are used to navigate music tracks.
volume
AMP
Resets remote to AMP mode
Cycles through subtitle
SUBT options, if available on DVD
or BD
Network media /USB commands
RED Red button for BD
When using the network client, the keys
below are used to navigate music files in
GREEN Green button for BD
AMP device mode.
BLUE Blue button for BD
RADIO Internal FM/DAB tuner input
BT Internal Bluetooth input
MEDIA Network, USB media input
DISC Internal disc input
AV AV HDMI input
SAT Satellite HDMI input
PVR PVR HDMI input
GAME Game console HDMI input
LINE Phono plug analogue input
AUX 3.5mm plug analogue input
STB digital coaxial audio
STB
input
TV TV optical audio output
E-20
SAT device mode
The SAT device mode button selects SAT
as the source. If configured to work with
your satellite reciever, the Solo remote can
subsequently control the device.
Selects the previous/next
0...9
9/:
track in the current playlist.
Play current track.
4
Pause current track. INFO
<
Navigates the files on
screen. OK selects/plays the
highlighted file.
Selects the previous/next
9/:
track in the current playlist.
Play current track.
4
MENU
Pause current track.
;
Stops playback.
<
Returns navigation to the top
level of the network client
menus ('Home').
RTN
AMP
RED
GREEN
YELLOW YELLOW button for Satellite
BLUE
Toggles power between
2
standby and on.
Functions as original remote
number key – usually for
channel selection.
Display INFO or OSD (On
Screen Display) function, if
available.
Rewind
7
Fast forward
8
Channel down
9
Channel up
:
Stop playback
<
Play content
4
Pause content
;
Record
Menu
Navigate setup and
programme selection menus.
OK confirms a selection
(equivalent to 'Enter' or 'Select'
on some remotes).
Returns navigation to the top
level of the menu ('Home').
Back
Resets remote to AMP mode
RED button for Satellite
GREEN button for Satellite
BLUE button for Satellite