Operations Using The On-Screen Bar - JVC KD-ADV7490 Manuel D'instructions

Using menu driven features... (DVD-Video/
DVD-VR)
1
Press TOP M/MENU to enter the menu screen.
% fi @ #
2
Press / / * / * to select an item you want
to start play.
3
Press ENT (enter) to confirm.
* Not applicable for DVD-VR.
Canceling the PBC playback... (VCD)
1
During stop, press DIRECT while holding SHIFT.
2
Hold SHIFT, then press the number buttons (0 – 9)
to enter the desired number.
3
Press ENT (enter) to confirm.
• To resume PBC, press TOP M/MENU.
20
Operations using the
on-screen bar
(DVD/DVD-VR/DivX/MPEG Video/VCD)
These operations are possible on the monitor using the
remote controller.
1
Show the on-screen bar (see page 21).
(twice)
2
Select an item.
3
Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
% fi
Press / to change the number, then press
move to the next entry.
% fi
• Each time you press /
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
% #
Press once, then twice to go to the third entry,
twice, then press ENT (enter).
To remove the on-screen bar
@ #
/ to
, the number increases/
%