Using The Bluetooth Cellular Phone - JVC KD-ADV7490 Manuel D'instructions

• Select "Delete," then confirm the selection.
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See
"Auto Connect" on page 51.)

Using the Bluetooth cellular phone

1 Select "BT-PHONE."
2
Enter Bluetooth menu.
3
Establish the connection with a device, then make a call (or settings
—
using the Bluetooth menu). (See pages 29 and 51.)
When a call comes in....
The source is automatically changed to "BT-PHONE."
When "Auto Answer" is activated....
The unit answers the incoming calls automatically, see
page 51.
• When "Auto Answer" is deactivated, press any
button (except
incoming call.
To end the call
Hold any button (except
• You can adjust the microphone volume level (see
page 51).
28
/control dial) to answer the
/control dial).
When a text message comes in....
If the cellular phone is compatible with Text Message
(notified through JVC Bluetooth adapter) and "Message
Info" is set to "Auto" (see page 51), the unit rings and
"Received Message" appears on the display to inform
you of the message arrival.
Press number button 3 to
select "No" or return to the
previous screen.