Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1) press the
button;
2) the first value of "defrost ON" will start to blink. If you want to change the value, you need to press
the
button;
3) repeat the steps 1) and 2) until all ON values are set;
4) press the
of "defrost OFF";
5) repeat the steps 1) and 2) until all OFF values are set;
6) press the
In this screen you can activate or deactivate the Critical Temperature
Control function. When the critical temperature value is (OFF), the
function is deactivate. you can do that by pressing the increase
or the decrease
key.
When you switch the machine on, if the product temperature is greater
than the one set, the display will blink and show
The "4" value represent the critical temperature. In order to stop the
warning signal, please press the
In this screen you can activate or deactivate the Cleaning warning
function. This function is used if the user wants the machine to show a
clear warning on the display that reminds to clean the machine. If the
Cleaning warning function is on (000d----) it is deactivated.
In order to activate it:
1)
press the
button;
2)
the first value will start to blink. If you want to change the value, you need to press the
3)
press the
button again;
4)
the second value will start to blink. If you want to change the value, you need to press the
button;
5)
press the
button;
6)
the third value will start to blink. If you want to change the value, you need to press the
button;
7)
press the
When the machine is turned on and the values (---) are zero, the display
will blink showing the cleaning warning:
Clean the tank as described in the usage manual pag.18; in order to
stop the warning signal, press the
will start again for the next warning.
000d = time in days for the cleaning warning to appear
- ---
= countdown (day to the warning)
For machines with auto refill set up ONLY! (This should be ON only if the
machine has the auto refill installed). In this screen you can activate or
deactivate the auto refill control signal.
button to exit the change function of "defrost ON" and go in change function
button to exit the change function. The time will be then saved.
:
button.
button to exit the change function.
button; thus the countdown
- 25 -
Max Temp
OFF / ON
key
PRODUCT
T > 4
CLEANING
000d - ---
CLEANING
REQUIRED
AUTOFILL
OFF / ON
button;
Publicité
Table des Matières
