10.8 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap.1). During this
warming up time the balance must be connected to the power supply (mains,
accumulator or battery) and be switched on.
The accuracy of the balance depends on the local acceleration of gravity.
The value of gravity acceleration is shown on the type plate.
11 Operation
11.1 Weighing
However, you can reset the weighing scale to zero by pressing
If the person is heavier than the weighing range, "OL"
28
Start balance by pressing
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for "0.0 kg" has appeared.
the
key.
Have person stand in the centre of the scales. Wait until the
standstill display „STABLE" appears, then read the weighing
result.
(=overload) will appear in the display.
.
MTA-M-BA-e-1612