How To Change The Dust Compartment Filter; When To Replace The Hepa Airclean 50; How To Replace The Hepa Airclean 50 Filter; Replacing One Type Of Exhaust Filter With Another - Miele HS15 Mode D'emploi

How to change the dust
compartment filter (dia. 29)
^ Open the dust compartment lid.
^ Pull the dustbag out by the grip on
the collar.
^ Open the blue filter frame fully and
remove the old filter. Hold by the
clean, unsoiled section to remove it.
^ Replace with a new dust
compartment filter.
^ Close the filter frame.
^ Fit the dustbag into the blue holder
as far as it will go.
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
When to replace the HEPA AirClean
50 (dia. 14)
Replace the Active AirClean 50 or
HEPA AirClean 50 exhaust filter if the
display for the exhaust filter change
indicator is completely filled with red.
This occurs after approx. 50 hours of
operation which is equivalent to about a
year of average use. The vacuum
cleaner can still be used. However, the
suction power will be reduced as will
the effectiveness of the filter if it is not
replaced in good time.
You can replace the HEPA AirClean 50
exhaust filter fitted in the vacuum
cleaner with one of the other Miele
exhaust filters if you wish (see
"Replacing one type of exhaust filter
with another").
How to replace the HEPA AirClean 50
filter (dia 30 + 31)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Lift the exhaust filter and remove it.
^ Insert a new exhaust filter making it
sure it goes in properly, then push it
down into position.
^ Press the exhaust filter change
indicator ~ (dia. 12).
^ After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 13).
If you wish to use an AirClean filter,
see "Replacing one type of exhaust
filter with another".
^ Close the dust compartment lid.
Replacing one type of exhaust filter
with another
Do not use more than one exhaust
filter at a time.
You can replace the standard HEPA
AirClean 50 exhaust filter with one of
the following exhaust filters:
a AirClean
b Active AirClean 50
en
41