Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
When to change the dust
compartment filter (for motor
protection)
Replace this filter every time you start a
new packet of dustbags. A dust
compartment filter is supplied with
every packet of Miele dustbags.
How to change the dust
compartment filter (dia. 24)
^ Open the dust compartment lid.
^ Pull the dustbag out by the grip on
the collar.
^ Unclip the filter frame and remove the
old filter. Hold by the clean, unsoiled
section to remove it.
^ Replace with a new dust
compartment filter.
^ Close the filter frame.
^ Fit the dustbag into the holder as far
as it will go.
^ Close the dust compartment lid.
When to change the exhaust filter
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 25):
a Air Clean
Replace this filter every time you start a
new packet of Miele dustbags. An Air
Clean exhaust filter is supplied with
every packet of Miele dustbags.
36
b Active Air Clean SF-AAC 50 (black)
c Active HEPA SF-AH 50 (blue)
Change these types of filter approx.
once a year.
Make a note of the date on the filter.
How to replace the Air Clean filter
(dia. 26 + 27)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Open the filter grille.
^ Take hold of the used Air clean filter
by the clean, unsoiled section and
take it out.
^ Replace it with a new Air Clean filter.
If you wish to replace the Air Clean
filter with an Active Air Clean filter or
with an Active HEPA filter, see
"Replacing one type of exhaust filter
with another".
^ Close the filter grille.
^ Close the dust compartment lid.
How to replace an Active Air Clean
filter or an Active HEPA filter (dia. 28
+ 29)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Lift the filter and remove it.
^ Replace with a new filter, and push it
down into place.
Publicité
Chapitres
Table des Matières
