Miele S 4213 Mode D'emploi page 25

~
While the vacuum cleaner is under guarantee, repairs
should only be undertaken by a service technician
authorised by Miele. Otherwise the guarantee will be
invalidated.
~
Do not pull or carry the appliance by the cable, and be
careful not to damage the cable when withdrawing the
plug from the socket.
Keep the cable away from sharp edges and do not let it be
squashed, for example, under a door.
Avoid running the vacuum cleaner over the cable.
This could damage the cable, plug or socket. The
appliance must not be used if any of these have suffered
damage.
~
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this work must
be done by the Miele Service Department or a Miele
authorised service technician.
~
When vacuuming especially fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects
of these discharges, a metal inlay has been incorporated
into the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming.
~
Do not let the vacuum cleaner get wet. Clean only with a
dry cloth or slightly damp cloth when disconnected from
the mains supply.
en - Warning and Safety instructions
25