Safety Warnings; General Safety Instructions For Power Tools - Festool TSC 55 REB Notice D'utilisation D'origine

Contents
1 Symbols..................................................... 17

2 Safety warnings.........................................17

3 Technical data........................................... 20
4 Parts of the device.....................................20
5 Intended use..............................................20
6 Commissioning..........................................20
7 Settings......................................................21
8 Working with the machine........................ 22
9 Service and maintenance..........................24
10 Accessories............................................... 24
11 Environment.............................................. 25
12 General information.................................. 25
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Inserting the battery pack
Removing the battery pack
Maximum power with two battery
packs (36 V).
Less power with one battery
pack (14.4 V/18 V).
Do not place down any saws with ex­
posed saw blades
Direction of rotation of saw and the
saw blade
Electro-dynamic run-down brake
STOP
Do not dispose of it with domestic
waste.
Saw blade measurement
a = diameter
Tool contains a chip which stores data.
See section 12.1
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Handling instruction
Tip or advice
2 Safety warnings
2.1 General safety instructions for power
tools
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Safety instructions for specific circular
saws
Cutting procedures
- DANGER: Keep hands away from
cutting area and the blade. Keep your sec­
ond hand on auxiliary handle, or motor
housing. If both hands are holding the saw,
they cannot be cut by the blade.
Do not reach underneath the workpiece.
-
The guard cannot protect you from the
blade below the workpiece.
- Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
Never hold the workpiece in your hands or
-
across your leg while cutting. Secure the
workpiece to a stable platform. It is impor­
tant to support the work properly to mini­
mise body exposure, blade binding, or loss
of control.
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
English
17