Safety Warnings; General Safety Instructions For Power Tools; Machine-Related Safety Instructions - Festool TS 55 REBQ Notice D'utilisation D'origine

English
Contents
1 Symbols..................................................... 16

2 Safety warnings.........................................16

3 Intended use..............................................18
4 Technical data........................................... 19
5 Parts of the machine.................................19
6 Starting up.................................................19
7 Settings......................................................20
8 Working with the machine........................ 21
9 Service and maintenance..........................22
10 Accessories............................................... 22
11 Environment.............................................. 23
12 General information.................................. 23
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Disconnecting the mains power cable
Connecting the mains power cable
Do not dispose of it with domestic
waste.
Direction of rotation of saw and the
saw blade
Handling instruction
Tip or advice
Safety class II
16
2 Safety warnings
2.1 General safety instructions for power
tools
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2

Machine-related safety instructions

-
Wear suitable personal protective equip­
ment: ear protection, safety goggles, a dust
mask for work which generates dust, and
protective gloves when working with raw
materials and when changing tools.
- Hazardous/toxic dust may be produced
during work (e.g. wood dust or mineral
wool dust). Contact with or inhalation of
this dust may pose a risk for the operating
personnel or persons in the vicinity. Com­
ply with the safety regulations that apply in
your country.
Wear a P2 respiratory mask to pro­
tect your health.
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.
Cutting procedures
DANGER: Keep hands away from
-
cutting area and the blade. Keep your sec­
ond hand on auxiliary handle, or motor
housing. If both hands are holding the saw,
they cannot be cut by the blade.
- Do not reach underneath the workpiece.
The guard cannot protect you from the
blade below the workpiece.
Adjust the cutting depth to the thickness of
-
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
Never hold the workpiece in your hands or
-
across your leg while cutting. Secure the
workpiece to a stable platform. It is impor­
tant to support the work properly to mini­