Communication; Commands - OHAUS Adventurer Pro AV53 Guide De L'utilisateur

Adventurer Pro

5.4 Communication

The balance is equipped with an RS232 interface (COM1). Some models are also equipped
with a second RS232 interface (COM2). Connecting the balance to a computer enables you to
operate the balance from the computer, as well as receive data such as displayed weight.

5.4.1 Commands

Commands listed in the following table will be acknowledged by the balance. The balance will
return "ES" for invalid commands.
Command Function
IP Immediate Print of displayed weight (stable or unstable).
P Print displayed weight (stable or unstable).
CP Continuous Print.
SP Print displayed stable weight.
SLP Auto Print stable non-zero displayed weight.
SLZP Auto Print stable non-zero weight and stable zero reading.
xP Interval Print x = Print Interval (1-3600 seconds)
H Enter Print Header Lines
Z Same as pressing Zero Key
T Same as pressing Tare Key.
xT Establish a preset Tare value in grams. X= PRESET TARE VALUE IN GRAMS.
PT Prints Tare weight stored in memory.
PM Print current mode (weighing mode).
M Scroll to the next enabled mode.
PU Print current weighing unit.
U Scroll to the next enabled unit.
OFF Turns balance OFF.
PSN Print Serial Number.
PV Print Version: name, software revision and LFT ON (if LFT is set ON).
EN-35