Totalize - OHAUS Adventurer Pro AV53 Guide De L'utilisateur

EN-16
3.5.5 Animal Weighing (Cont.)
Completed Animal Cycle
The primary display shows the weight of the animal and the secondary display alternates between
ANIMAL and HOLD.
Automatic Mode
The balance returns to the Ready condition when the animal is removed from the pan. If the
Function button is pressed before the animal is removed from the pan, the primary display
shows the actual weight and the secondary display alternates between ANIMAL and CLEAR
PAN until the animal is removed from the pan. The balance then returns to the Ready condition.
Semiautomatic and Manual Modes
Remove the animal from the pan and press the Function button to return to the Ready condition.
If the Function button is pressed while the animal is on the pan, the primary display shows the
actual weight and the secondary display alternates between ANIMAL and CLEAR PAN. The
balance returns to the Ready condition when the animal is removed from the pan.
ADJUSTMENTS
The Animal Weigh level and mode settings are made in the Mode menu.

3.5.6 Totalize

Enter this mode to measure the total weight of multiple items. Refer to paragraph 3.4.3 to
enable totalizing.
USE
The primary display shows the current weight.
The secondary display alternates between
TOTALIZE and the current totalized weight.
Adding Weight to the Total
Automatic Mode
Place the item on the weighing pan. The
weight of the item is shown on the primary
display. The weight of the item is added
automatically to the total weight and the new
total is shown on the secondary display.
Remove the item from the weighing pan, then
add the next item.
Adventurer Pro