Readout; Mode; Unit - OHAUS Adventurer Pro AV53 Guide De L'utilisateur

Adventurer Pro

3.7.3 Readout

READOUT
Auto Zero Off, .5d, 1d, 2d, 5d
Filter Low, Medium, High
Gross Ind. G, B, Off
End Read
Auto Zero
Allows setting the balance auto zero level
setting: .5, 1, 2 or 5 divisions. Balance
maintains zero until threshold is exceeded.
Filter
Allows setting the balance filter level: Low,
Medium, High. Compensates for vibration or
excessive air currents.
Gross Ind.
Allows setting the gross indicator to G (gross),
B (brutto) or Off.
End Read
Press the Yes button to advance to the Mode
submenu. Press No to return to Auto Zero.

3.7.4 Mode

The Mode submenu is used to turn the
application modes On or Off.
MODE
Weigh On/Off
Count On/Off
Apw Optimize On/Off
Percent On/Off
Check Weigh On/Off
Animal Auto, Semi, Man, Off
Level sec. 5,10, 15
Totalize On/Off
End Mode
Weigh
Allows setting the weighing mode On or Off.
Count
Allows setting the counting mode On or Off. If
Count is set On, APW optimize can be set On
or Off.
Percent
Allows setting the percent weighing mode On
or Off.
Check Weigh
Allows setting the check weighing mode On or
Off.
Animal
Allows setting the animal weighing mode to:
Auto, Semi, Manual or Off. If set to Auto, Semi
or Manual, level (averaging period) can be set
to 5, 10 or 15 seconds.
Totalize
Allows setting the totalize mode to Auto, Manual
or Off.
End Mode
Press the Yes button to advance to the Unit
submenu. Press No to return to Weigh.

3.7.5 Unit

The Unit submenu is used to turn measuring
units On or Off. Available measuring units vary
by model.
UNIT
mg On/Off
t TW
g On/Off
m
kg On/Off
Tical
oz On/Off
Baht
lb On/Off
Meshgal On/Off
ct On/Off
Tola
dwt On/Off
Custom On/Off
ozt On/Off
End Unit
GN On/Off
N On/Off
t HK On/Off
t SC On/Off
EN-21
On/Off
On/Off
On/Off
On/Off
On/Off