Removing The Standard Seat - RECARO C 6000 Notice De Montage

3.3 Removing the standard seat

Caution:
Before starting the removal process, check to ensure that your vehicle is parked safely and that
you will always have a good foothold whilst carrying out the work.
Important note:
Remove the standard seat together with the console and the belt lock from the vehicle.
The new screws supplied in the kit must always be used to secure the RECARO seat and the
console in place.
A
1. Move the steering wheel as far forward as possible.
2. Move the backrest into the vertical position and the seat into the rearmost position.
B
1
1. Loosen and remove the five screws (1, 2) in the floor of the vehicle.
(SW 14 adapter)
RECARO Automotive Seating
Steering wheel adjustment – front
Standard seat adjustment – rear
1 Console screws, front
2 Console screws, rear
2
K0313
Page 8