Mounting The Recaro Adapter On The Console - RECARO C 6000 Notice De Montage

3.5 Mounting the RECARO adapter on the console

Important note:
Take note of the markings on the consoles and the adapters during the installation.
KBA label
K
1
1. Place the adapter (1) on the console. Take note of the markings!
2. Tightly screw the adapters with the screws (2) from the installation kit using the stipulated torque (T30
Torx adapter).
Torque: M8 screws: 25 Nm ± 2 Nm
RECARO Automotive Seating
2
K0321
The arrow must point in the direction of travel.
The KBA label must be on the inside of the
tunnel side adapter and point in the direction
of travel.
1 Adapter
2 M8 installation kit screws
Page 13