IV. GETTING STARTED
4.1- Unpacking
We recommend that at least 2 persons unpack the log cutting saw package.
Remove product from its packaging.
Check that product and accessories are not damaged.
Content:
1. Main machine
2. Cover for working table
3. Wood support
4. Operating handle
5. Vice working table
6. Connecting plates for vice working table
4.2- Assembly
For packing reasons, the machine is not completely assembled and therefore requires some assembly
from the user.
Return spring assembly
Fig.2 - Remove nut (a) from return spring system (b).
Fig.3 - Insert shaft through the hole (c) on frame, secure it with M22 nut (a).
Fig.2
Fig.3
Page 31 of 32