Overview; Hedge Trimmer; Carrying Systems - Stihl HSA 94 R Notice D'emploi

English
3

Overview

3.1

Hedge trimmer

1
11
#
12
13
1 Blade scabbard
The blade scabbard protects against contact
with the cutting blades.
2 Loop handle
The loop handle is used to hold, control and
carry the hedge trimmer.
3 Control bar
The control bar switches the hedge trimmer
on and off together with the trigger.
4 Retaining latch
The retaining latch unlocks the trigger switch
together with the trigger lockout. It is also
used to select the power level.
5 LEDs
The LEDs indicate the selected power level.
6 Trigger lockout
The trigger lockout unlocks the trigger
together with the retaining latch.
7 Control handle
The control handle is used to control, hold
and guide the hedge trimmer.
8 Socket
The socket receives the connecting cable
plug.
The cover is part of the motor housing. Remove the cover only to install a Smart Connector 2 A
2 )
and store it safely for later re-installation. Always use the hedge trimmer with the cover or Smart
Connector 2 A installed.
22
4 5
6
7
8
10
2
9
3
14
15
16
9 Trigger
The trigger switches the hedge trimmer on
and off together with the control bar.
10 Locking slide
Unlocks rotating control handle.
11 Cover
2
The cover is the placeholder for a Smart Con‐
nector 2 A.
12 Screw plug
The screw plug closes the filler opening for
STIHL multi-purpose grease.
13 Hand guard
The hand guard protects the hand on the loop
handle from contact with the cutting blades.
14 Cut protection
The cut protection helps protect user's thigh
from contact with rear end of the cutting
blades.
15 Cutting blades
The cutting blades cut the hedge.
16 Tip guard
The tip guard protects the nose of the cutting
blades from contact with foreign objects.
# Rating plate with machine number
3.2

Carrying Systems

3
1
2
6 5
1 STIHL AR Battery
Supplies power to the hedge trimmer.
3 Overview
5
4
3
2
2
3
0458-005-9621-B