Custom Program - Acova Z23020 Notice D'utilisation

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:19 Page38

3.3.2 Custom program

TO CHANGE THE PROGRAM, TURN THE DIAL TO PROG
The screen shows the program for day 1 (for example Monday).
against the day being programmed.
– When the first timeslot (from midnight to 1am) blinks, press
COMFORT
– You will move to the next timeslot automatically. Repeat until you have entered
settings for the entire day.
– If you wish to make any corrections, cycle through all the timeslots until you
reach the one you want to change.
– When you are ready, press OK to confirm your settings for the day and move to
the next day.
NOTE To apply the same program for the following day, keep the
down for approximately 3 seconds until the program for the following day is
displayed.
Start of timeslot you are modifying
EN
TO REVIEW YOUR PROGRAM
Press the
start times for the
entered previously.
Press OK to move to the next day.
TURN THE DIAL TO EXIT THE PROGRAM FUNCTION.
38
mode or to select
ECO
First timeslot
Select Economy for 1h
Select Comfort for 1h
Move to next day
button repeatedly to review the
and
COMFORT ECONOMY
mode.
Day you are modifying
Program profile for the day
you are modifying
Go to next program change
periods you
is displayed
to select
OK
button pressed
Start of timeslot displayed
Review the various or
periods.