Using The Rf Prog Room Thermostat - Acova Z23020 Notice D'utilisation

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:19 Page36
3. Using the RF Prog room
thermostat
3.1 The operating modes
NO HEAT The appliance is in No Heat mode.
COMFORT This mode should be used when the room is occupied (default
temperature: 19°C).
ECONOMY (ECO) This mode should be used when the room is unoccupied.
It is recommended for periods of absence longer than 2 hours (default
temperature: 16°C).
FROST PROTECTION This mode should be used when the room is unoccupied
for long periods. It is recommended for periods of absence longer than 24
EN hours (default temperature: 7°C).
AUTO The thermostat operates your appliance in accordance with your
chosen weekly program (see section 3.3) and displays the mode selected for
the current timeslot.
3.2 Programming the setpoint temperatures
The setpoint temperatures are the room
temperatures you wish to apply for each of the
above modes. Turn the dial to:
to set the frost protection temperature
(between 5°C and 15°C),
to set the economy temperature
(between 10°C and 30°C),
to set the comfort temperature
(between 10°C and 30°C),
Press + or - to change the temperature in 0.5°C increments. Then turn the dial
to move to the next setting.
36
NOTE Press the i button to briefly display the current room temperature.
Setpoint temperature