Wall Mounting; Using The Stand - Acova Z23020 Notice D'utilisation

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:19 Page34
To ensure optimum room temperature regulation, the thermostat must be
installed in the same room as the appliance(s) it is controlling.
The radio signals can penetrate obstacles such as furniture, partition walls, etc.
over a free-field range of 100 to 300 metres. This range may vary according to the
EN installation conditions and the electromagnetic environment.

2.1.1 Wall mounting

Remove the cover using a screwdriver
( ). Remove the batteries supplied
with the device.
Secure the thermostat to the wall using
screws and wall plugs or place in an
electrical mounting bo (B : centre to
centre distance 60 mm).
Replace the batteries, ensuring the
correct polarity.

2.1.2 Using the stand

You can place the transmitter on a
piece of furniture using the stand
supplied.
34
Wall mounted
Approximate
height
1.50 m
On a piece
of furniture
20 cm min
+
-
1
2
-
B
+