Programming The Thermostat - Acova Z23020 Notice D'utilisation

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:19 Page37

3.3 Programming the thermostat

The program function is used to schedule operation of the
modes throughout the day.
The thermostat can be set to operate to the same program every day (daily
program) or to a different program each day (weekly program).
You can also switch your appliance to any desired mode (
manually using the dial at any time if your schedule changes.
3.3.1 Default program
TO VIEW THE PROGRAM, TURN THE DIAL TO PROG
On first use, the programmable thermostat is set to run the program "
from 6am to 11pm" every day of the week.
Start of timeslot displayed
Default program profile:
– from midnight to 6am:
– from 6am to 11pm:
– from 11pm to midnight:
Move to next day
mode
ECO
mode
COMFORT
mode
ECO
and
ECO COMFORT
or or
COMFORT
Day displayed
Program profile for day
displayed
Go to next program change
)
EN
37