Specifying Time; Switching Audio, Subtitle And Angle; Operating With Information Display - Pioneer AVH-P6400CD Mode D'emploi

DVD

Specifying time

You can specify a time from which playback
starts (Time search).
1 Push the remote controller's joystick
left/right to select Time in Information
Display 1.
The selected item is indicated in green.
2 Input the desired time with the remote
controller's number keys.
e.g.,
10 minutes 09 seconds: press
order.
78 min 00 sec: press
7
Press to delete input numbers.
C
3 Press the remote controller's joystick
directly down to complete selection.
Notes
• Some discs may feature a prohibited mark,
indicating that display of Title and Chapter
indications is not possible.
• You cannot specify a Time in the Stop mode.
• If you perform no operation for about eight
seconds, the specified number becomes
invalid.
, , , and in
1 0 0 9
, , and in order.
8 0 0

Switching audio, subtitle and angle

You can change audio, subtitle and angle if that
information is recorded on the disc.
1 Push the remote controller's joystick
left/right to select
Audio
Information Display 1.
The selected item is indicated in green.
2 Push the remote controller's joystick
up/down to select a desired setting, and
press.
Note
• You can change audio, subtitle and angle
settings during playback with AUDIO, S.TITLE
and ANGLE.
Operating with Information
Display 2
With Information Display 2, you can set Repeat
play range and audio L/R settings. You can also
specify a Title, Chapter and Time.
, or in
S.TITLE ANGLE
En
Section
10
51