Initial Settings; Adjusting Initial Settings; Switching The Warning Tone; Switching The Auxiliary Setting - Pioneer AVH-P6400CD Mode D'emploi

Initial Settings

Adjusting initial settings

1
Initial settings lets you perform initial set up of
different settings for this unit.
1
display
FUNCTION
Shows the function status.
You cannot select AUDIO MENU from the OFF
SOURCE MENU.
1 Press and hold until the unit turns
SOURCE
off.
2 Press and the OFF SOURCE
A.MENU
MENU is displayed.
3 Press 5 or ∞ to select
.
A.MENU
(FM tuning step)
FM STEP
(Priority function)
DAB PRIORITY
(Auto PI seek)
RDS AUTO PI
(Warning tone)
DETACH WARNING
(Auxiliary)
AUX
(Illumination color)
ILLUMINATION
(Rear output and subwoofer)
REAR SP
(Telephone muting)
TEL MUTE/ATT
You can operate a desired function. For details,
refer to the pages for each of the functions.
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
on the remote control.
WIDE
, and press
INIT
or
BAND/ESC

Switching the warning tone

If the operation panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can turn
off this warning tone.
1 Press 5 or ∞ to select
from the INIT MENU, and press
DETACH WARNING adjustment indications are
displayed.
ON or OFF with 5/∞.
2 Select
WARNING:
Pressing 5/∞ will switch
and that status will be displayed
ON and OFF
(e.g., ).
WARNING :ON

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press 5 or ∞ to select
MENU, and press
A.MENU
AUX adjustment indications are displayed.
ON or OFF with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
and that status will be displayed (e.g.,
OFF
).
AUX :ON
DETACH WARNING
.
A.MENU
between
WARNING
from the INIT
AUX
.
between
AUX ON and
En
Section
12
59