Adjusting Bass; Adjusting Treble - Pioneer AVH-P6400CD Mode D'emploi

Section
Audio Adjustments
11
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
1 Press 5 or ∞ to select
AUDIO MENU, and press
EQ MENU is displayed.
(band)
BAND
(adjustment level)
LEVEL
(frequency)
FREQUENCY
(quality factor)
Q FACTOR
2 Press 5 or ∞ to select the item you want to
adjust.
3 Press 2 or 3 to adjust the item.
• – is displayed as the adjustment level is
+6 –6
increased or decreased.
Note
• If you make adjustments when a curve other
than
CUSTOM2
is updated.
56
En
).
LOW/MID/HIGH
from the
EQ MENU
.
A.MENU
is selected,
CUSTOM1

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press 5 or ∞ to select
AUDIO MENU, and press
BASS adjustment indications are displayed.
2 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level.
increased or decreased.
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— —
40 63 100
curve

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and
FRT1
affects only the front output: rear output cannot
be adjusted.
1 Press 5 or ∞ to select
AUDIO MENU, and press
TREBLE adjustment indications are displayed.
2 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level.
is increased or decreased.
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— —
2.5k 4k 6.3k
from the
BASS
A.MENU
– is displayed as the level is
+6 –6
— (Hz).
160
modes, treble adjustment
FRT2
TREBLE
A.MENU
– is displayed as the level
+6 –6
— (Hz)
10k
.
from the
.