Remote Control - Pioneer AVH-P6400CD Mode D'emploi

Section
Before You Start
01
∞

Remote control

& Volume control (–/+) buttons
Press to – or + the volume.
* Joystick
Use when using with a Pioneer DVD compo-
nent. If you set the switch to DVD, you can
perform some Pioneer DVD unit operations.
( Picture source switch
Press to cycle through all of the available
sources. Performs the same operation as @
on the main unit.
) Power button
Use when using with a Pioneer DVD compo-
nent.
_ ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
+ STOP button
Use when using with a Pioneer DVD compo-
nent.
¡ NUMBER button
Use when using with a Pioneer component
enabling DVD playback.
14
En
4
&
£
¢
™
™ BACK button
Returns you to the display before a MENU or
PICTURE ADJUST
£ MENU, TOP , AUDIO, RTN, S.TITLE,
ANGLE buttons
Use when using with a Pioneer DVD compo-
nent.
¢ Audio control buttons and DVD control
buttons
Use to operate AUDIO MENU, select stations
etc. Performs the same operation as 7 on
the main unit.
Switch § to the DVD position, and use when
using with a Pioneer component that
enables DVD playback.
∞ Remote control selection switch
Switch to change the setting of the remote
control. (Refer to page 61.)
§ Remote control operation mode switch
Switch the operation mode between AUDIO
mode (sources can be operated by remote
control) or DVD mode (only DVD player can
be operated by remote control).
(
*
§
0
)
_
6
+
¡
display.