Switching The Display; Swiching The Channel Select Mode; Recalling Channel; Storing The Channel - Pioneer AVH-P6400CD Mode D'emploi

Other Functions
1 Press to select the XM
SOURCE
Press until you see
SOURCE
2 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Press to select a band.
BAND/ESC
Press until the desired band is dis-
BAND/ESC
played, , or
XM1 XM2 XM3
4 Select the desired channel with 2 or 3 .

Switching the display

Each press of the
DISPLAY
part of the source in the following order:
—
CH Name Artist Name/Feature
—
Title Additional Information

Swiching the channel select mode

You can switch if you select a Channel with a
Channel Number or from a Channel Category
when you select a channel.
1 Press 5 or ∞ to select
XM MENU and press
A.MENU
CH MODE adjustment indications are
displayed.
2 Press 2 or 3 to select the desired channel
select mode.
(Channel number select mode) —
CH NUMBER
(Channel category select mode)
CATEGORY
.
displayed.
XM
.
changes the lowest
—
Song/Program
from the
CH MODE
.

Recalling channel

If you press 5 or ∞ you can easily store up to six
previously registered channels with the 5 or ∞
button.
1 Press 5 or ∞ to select
the XM MENU, and press
P.CH RECALL adjustment indications are dis-
played.
2 Select a preset channel number with 5 or
∞ and press
.
A.MENU
When you have finished, press
return to the source display.

Storing the channel

Once stored in memory, you can easily select a
desired channel from the P.CH RECALL.
1 Press 5 or ∞ to select
the XM MENU, and press
P.CH MEMORY adjustment indications are dis-
played.
2 Adjust channel with 2 or 3.
3 Select a preset channel number with 5 or
∞ and press
.
A.MENU
4 If you want to preset frequencies one after
another, use 5 or ∞ to move to the next preset
channel you want to use to store a frequency,
and perform the same operation.
When you have finished, press
return to the source display.
Section
from
P .CH RECALL
.
A.MENU
to
BAND/ESC
from
P .CH MEMORY
.
A.MENU
to
BAND/ESC
En
13
65