On First-Time Startup - Pioneer AVH-4200NEX Manuel Du Propriétaire

Basic operation
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1
1 USB cable
2 USB storage device
p Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
p From the second time on, enter the password for the anti-
theft function if the password entry screen appears.
2 Touch the language.
3 Touch .
The "Smartphone Setup" screen appears.
4 Touch the item.
 Refer to Information on the connections and functions for
each device on page 18
5 Touch .
The warning message screen appears.
6 Touch [OK].
The top menu screen appears.
10
2