Setting The Anti-Theft Function; Restoring This Product To The Default Settings - Pioneer AVH-4200NEX Manuel Du Propriétaire

Other functions
3 Touch the source you want to show on the rear
display.

Mirror
The video on the front screen of this product is output to the
rear display.
— Not all videos or sounds can be output to the rear display.

DVD/CD
The video and sound of a disc are output to the rear display.
— Compatible video types are DVD-V, Video-CD, DivX, MPEG-
1, MPEG-2, and MPEG-4 only.
 USB/iPod1
The video and sound of the USB storage device or iPod are
output to the rear display.
— The port that supports the rear display will only be USB
port 1.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.

SD
The video and sound of the SD memory cards are output to
the rear display.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.
 AV
The video and/or sound of the AV input source are output to
the rear display.
— The video image and sound are output only when "AV
Input" is set to "Source".
 Refer to Starting procedure (for AV source) on page 41.
 Source OFF
Nothing is output to the rear display.

Setting the anti-theft function

You can set a password for this product. If the back-up lead is cut
after the password is set, this product prompts for the password
at the time of next boot up.
Important
If you forgot your password, contact the nearest authorized
Pioneer Service Station.
Setting the password
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
45
2 Touch , followed by
1 2
hold .
3
56
3 Touch [Set Password].
4 Enter the password.
p 5 to 16 characters can be entered for a password.
5 Touch [Go].
6 Enter a password hint.
p Up to 40 characters can be entered for a hint.
7 Touch [Go].
p If you want to change the password currently set, enter the
current password and then enter the new one.
8 Check the password, and then touch [OK].
Deleting the password
The current password and password hint can be deleted.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
45
2 Touch
hold
 Refer to Setting the password on page 56.
3 Touch [Clear Password].
4 Touch [Yes].
5 Touch [OK].
6 Enter the current password.
, and then touch and
7 Touch [Go].
A message indicating that the security setting is canceled
appears.
1 2
, followed by , and then touch and
1 2
.
3
Restoring this product to the
3
default settings
You can restore settings or recorded content to the default set-
tings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
p Some of the settings and recorded contents will not be reset.
Method 2: Restore the default settings from the
"System" menu
 Refer to Restoring the default settings on page 56.
Method 3: Press the RESET button
 Refer to Resetting the microprocessor on page 6
p Some of the settings and recorded contents will not be reset.
Restoring the default settings
CAUTION
Do not turn off the engine while restoring the settings.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
45
2 Touch [AV Source Settings].
3 Touch [Restore Settings].
A message confirming whether to initialize the settings appears.
4 Touch the item you want to initialize.

All Settings
Almost all settings or recorded content returns to the
default.
 Audio Settings
p This setting is available when the source is turned off.

Theme Settings

Bluetooth Settings
5 Touch [Restore].