Setting The Time And Date; Storing Song Information To An Ipod (Itunes Tagging); Setting The "Sound Retriever" Function; Changing The Wide Screen Mode - Pioneer AVH-X7800BT Manuel Du Propriétaire

Common operations
 Refer to Setting the "Sound Retriever" function on page
46
4 Screen display mode key
Changes the wide screen mode
 Refer to Changing the wide screen mode on page 46

Setting the time and date

1 Touch the current time on the screen.
2 Touch or to set the correct time and
date.
You can operate the following items: Year, month, date, hour,
minute.
p You can change the time display format to "12hour" (default)
or "24hour".
p You can change the order of date display format: Day-month-
year, Month-day-year, Year-month-date.
Storing song information to an
iPod (iTunes Tagging)
You can store song information to the iPod when this product
receives song information. The songs will appear in a playlist
called "Tagged playlist" in iTunes the next time you synchronize
your iPod. You can directly buy the songs via this product.
p The iTunes Tagging function is available while digital broad-
casts are being received.
p This function is available for the following iPod models:
iPhone 3G, 3GS, 4, 4s, 5, 5c, 5s, 6, 6 Plus
iPod touch 1st, 2nd, 3rd, 4th, 5th generation
iPod classic 1st, 2nd generation
iPod nano 3rd, 4th, 5th, 6th generation
p The version of iTunes must be 7.4 or higher.
1 Tune into the broadcast station.
 Refer to Radio on page 19
2 Touch the song information.
The information on the song on air is stored in this product.
When the information is acquired,
displayed.
p The song information for up to 50 songs can be stored in this
product.
3 Connect your iPod.
The song information is transferred to your iPod.
p When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
46
p When the song information transfer is completed, the infor-
mation stored in this product will be automatically deleted.
p If you turn off this product or disconnect the iPod while
transferring song information, the transfer may not success-
fully complete.
p While this product is storing song information, transfer to an
iPod is not possible.
Setting the "Sound Retriever"
function
The "Sound Retriever" function automatically enhances com-
pressed audio and restores rich sound.
1 Touch
 (Mode1) (default),
"Sound Retriever" function.

(Off): Deactivates the "Sound Retriever" function.
p Mode2 has a stronger effect than Mode1.
Changing the wide screen
mode
You can set the screen size for the video and JPEG images.
p The default setting is "Full", and for JPEG images is
"Normal".
p JPEG can be set to either "Normal" or "Trimming" in wide
screen mode.
1 Touch the screen display mode key.
p The appearance of this key changes according to the current
setting.
2 Touch the desired mode.
 Full:
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.

Zoom:
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.
turns off and is
 Normal:
A 4:3 picture is displayed normally, without changing its
proportion.

Trimming
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p This setting is for JPEG images only.
p You cannot operate this function while driving.
to switch the settings.
(Mode2): Activates the
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in "Zoom"
mode.